Netgear XCM8806 Chassis Hardware Installation Guide - Page 567

NETGEAR 8800 Chassis Switch CLI Manual Default The default value is the ASCII representation of the ingress port's SNMP ifIndex. Usage Guidelines This command allows you to configure the port information portion of the circuit ID whose format is - for each port. The parameter is a string of up to 32 bytes in length. When a specific value is not configured for port information, the port_info defaults to the ASCII representation of the ingress ports's SNMP ifIndex. configure ip-security dhcp-snooping information circuit-id vlan-information configure ip-security dhcp-snooping information circuit-id vlan-information {vlan} [ | all] Description Configures the VLAN info portion of the circuit ID of a VLAN. Syntax Description vlan_info vlan_name all Specifies the circuit ID VLAN information for each VLAN in the format of -; maximum length is 32 bytes. Specifies the VLAN for which DHCP should be enabled. Specifies all VLANs. Default The default value is the ASCII representation of the ingress VLAN's ID. Usage Guidelines This command allows you to configure the VLAN information portion of the circuit ID of a VLAN. The VLAN info is a string of characters of up to 32 bytes in length, and is entered in the format of . When a specific value is not configured for a VLAN, vlan_info defaults to the ASCII representation of the ingress VLAN's ID. configure ip-security dhcp-snooping information option configure ip-security dhcp-snooping information option Description Enables the Dynamic Host Configuration Protocol (DHCP) relay agent option (option 82). Syntax Description This command has no arguments or variables. Chapter 15. Security Commands | 567