Netgear XCM8806 Chassis Hardware Installation Guide - Page 438

NETGEAR 8800 Chassis Switch CLI Manual create protocol fred create vlan create vlan {vr } Description Creates a named VLAN. Syntax Description vlan_name vr vr-name Specifies a VLAN name (up to 32 characters). Specifies a virtual router. Specifies in which virtual router to create the VLAN. Note: User-created VRs are supported only on the platforms listed for this feature in Appendix A in the NETGEAR 8800 User Manual. On switches that do not support user-created VRs, all VLANs are created in VR-Default and cannot be moved. Default A VLAN named Default exists on all new or initialized NETGEAR 8800 switches: • It initially contains all ports on a new or initialized switch, except for the management port(s), if there are any. • It has an 802.1Q tag of 1. • The default VLAN is untagged on all ports. • It uses protocol filter any. A VLAN named Mgmt exists on switches that have management modules or management ports: • It initially contains the management port(s) the switch. • It is assigned the next available internal VLANid as an 802.1Q tag. If you do not specify the virtual router, the VLAN is created in the current virtual router. Usage Guidelines A newly-created VLAN has no member ports, is untagged, and uses protocol filter any until you configure it otherwise. Use the various configure vlan commands to configure the VLAN to your needs. Internal VLANids are assigned automatically using the next available VLANid starting from the high end (4094) of the range. The VLAN name can include up to 32 characters. VLAN names must begin with an alphabetical letter, and only alphanumeric, underscore (_), and hyphen (-) characters are 438 | Chapter 9. VLAN Commands