Netgear XCM8806 Chassis Hardware Installation Guide - Page 73
con snmpv3 add filter-profile
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
NETGEAR 8800 Chassis Switch CLI Manual Description Adds a filter to a filter profile. Syntax Description hex_profile_name profile_name object identifier subtree_mask included excluded volatile Specifies the filter profile that the current filter is added to. The value is to be supplied as a colon separated string of hex octets. Specifies the filter profile that the current filter is added to in ASCII format. Specifies a MIB subtree. Specifies a hex octet string used to mask the subtree. For example, f7a indicates 1.1.1.1.0.1.1.1.1.0.1.0. Specifies that the MIB subtree defined by / is to be included. Specifies that the MIB subtree defined by / is to be excluded. Specifies volatile storage. Default The default values are: • mask value-empty string (all 1s) • type-included • storage-non-volatile Usage Guidelines Use this command to create a filter entry in the snmpNotifyFilterTable. Each filter includes or excludes a portion of the MIB. Multiple filter entries comprise a filter profile that can eventually be associated with a target address. Other commands are used to associate a filter profile with a parameter name, and the parameter name with a target address. This command can be used multiple times to configure the exact filter profile desired. Example The following command adds a filter to the filter profile prof1 that includes the MIB subtree 1.3.6.1.4.1/f0: configure snmpv3 add filter prof1 subtree 1.3.6.1.4.1/f0 type included configure snmpv3 add filter-profile configure snmpv3 add filter-profile [[hex ] | ] param [[hex ]] | ] {volatile} Chapter 3. Commands for Managing the Switch | 73