Netgear XCM8806 Chassis Hardware Installation Guide - Page 311
enable inline-power
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 311 highlights
NETGEAR 8800 Chassis Switch CLI Manual Note: You can set the reserved power budget to 0 for a slot if, and only if, you first issue this command. On a stack if you do not specify a slot number, the command operates on all active nodes. This command operates only on nodes in the active topology. Example The following command removes power to all PDs on slot 3: disable inline-power slot 3 enable inline-power enable inline-power Description Enables PoE power to all ports on all slots. Syntax Description This command has no arguments or variables. Default Enable. Usage Guidelines You can control whether inline power is provided to the system by using the disable inline-power command and the enable inline-power command. By default, inline power provided to all ports is enabled. Enabling inline power starts the PoE detection process used to discover, classify, and power remote PDs. Note: If your chassis has an inline power module and there is not enough power to supply a slot, that slot will not be powered on; the slot will not function in data-only mode without enough power for inline power. Disabling inline power using the disable inline-power command does not affect the data traffic traversing the port. And, disabling the port using the disable port command does not affect the inline power supplied to the port. Chapter 7. PoE Commands | 311