Netgear XCM8806 Chassis Hardware Installation Guide - Page 774

NETGEAR 8800 Chassis Switch CLI Manual In an MSTP environment, you cannot delete or disable a CIST if any of the MSTIs are active in the system. Example The following command deletes an STPD named purple_st: delete stpd purple_st disable stpd disable stpd {} Description Disables the STP protocol on a particular STPD or for all STPDs. Syntax Description stpd_name Specifies an STPD name on the switch. Default Disabled. Usage Guidelines After you have created the STPD with a unique name, the keyword stpd is optional. If you want to disable the STP protocol for all STPDs, do not specify an STPD name. In an MSTP environment, you cannot delete or disable a CIST if any of the MSTIs are active in the system. Example The following command disables an STPD named purple_st: disable stpd purple_st The following command disables the STP protocol for all STPDs on the switch: disable stpd disable stpd auto-bind disable stpd auto-bind vlan Description Disables the ability to automatically add ports to an STPD when they are added to a member VLAN. 774 | Chapter 17. STP Commands