Netgear XCM8806 Chassis Hardware Installation Guide - Page 503

NETGEAR 8800 Chassis Switch CLI Manual Description Deletes the named flow redirection policy. Syntax Description flow-redirect-name Specifies the name of the flow redirection policy. Default N/A. Usage Guidelines Use this command to delete a named flow-redirection policy. Before it can be deleted, all nexthop information must be deleted, otherwise an error message is displayed. disable access-list permit to-cpu disable access-list permit to-cpu Description Allows special packets to be blocked by low priority ACLs. Syntax Description This command has no arguments or variables. Default Enabled. Usage Guidelines This command allows ACLs to deny certain special packets from reaching the CPU, even if the packets match ACLs that would otherwise deny them. The special packets include STP BPDUs and ARP replies for the switch. When this feature is disabled, these same packets will be denied if an ACL is applied that contains a matching entry that denies the packets. Contrary to expectations, the packets will still be denied if there is a higher precedence entry that permits the packets. To enable this feature, use the following command: enable access-list permit to-cpu Example The following command enables ACLs to deny STP BPDU packets from reaching the switch CPU: Chapter 13. ACL Commands | 503