Netgear XCM8806 Chassis Hardware Installation Guide - Page 415
have two software images downloaded on the switch, only the currently running
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 415 highlights
NETGEAR 8800 Chassis Switch CLI Manual Description Displays the hardware serial and version numbers, the software version currently running on the switch, and (if applicable) the software version running on the modules and power controllers. Syntax Description detail process name images partition slotid Specifies display of slot board name and chassis or platform name. Specifies display of all of the processes on the switch. Specifies display of a specific process on the switch. Specifies the display of installed images. Specifies display of a specific partition (primary or secondary). Specifies display of an MSM/MM in a specific slot (A or B). Default N/A. Usage Guidelines The following describes the information displayed when you execute the show version or show version detail commands: • Part Number-A collection of numbers and letters that make up the part number of the switch and when applicable the hardware components installed in the switch. • Serial Number-A collection of numbers and letters that make up the serial number of the switch and when applicable the hardware components installed in the switch. Note: For information about the physical location of the serial number on your switch, refer to the section that describes your specific switch model in the hardware documentation. • Image-The NETGEAR 8800 software version currently running on the switch. If you have two software images downloaded on the switch, only the currently running NETGEAR 8800 version information is displayed. The information displayed includes the major version number, minor version number, a specific patch release, and the build number. The software build date is also displayed. • BootROM-The BootROM version currently running on the switch. • Diagnostics-A number that corresponds to the version of the I/O module diagnostics included in the particular version of NETGEAR 8800 OS. Chapter 8. Commands for Status Monitoring and Statistics | 415