Netgear XCM8806 Chassis Hardware Installation Guide - Page 32

NETGEAR 8800 Chassis Switch CLI Manual Default N/A. Usage Guidelines The format for the system date and time is as follows: mm dd yyyy hh mm ss The time uses a 24-hour clock format. You cannot set the year earlier than 2003 or past 2036. You have the choice of inputting the entire time/date string. If you provide one item at a time and press TAB, the screen prompts you for the next item. Press to complete the input. Example The following command configures a system date of February 15, 2002 and a system time of 8:42 AM and 55 seconds: configure time 02 15 2002 08 42 55 configure timezone configure timezone {name }  {autodst {name } {}  {begins [every | on ] {at }  {ends [every | on ] {at }}}  | noautodst} Description Configures the Greenwich Mean Time (GMT) offset and Daylight Saving Time (DST) preference. Syntax Description tz_name GMT_offset autodst dst-timezone-ID dst_offset Specifies an optional name for this timezone specification. May be up to six characters in length. The default is an empty string. Specifies a Greenwich Mean Time (GMT) offset, in + or - minutes. Enables automatic Daylight Saving Time. Specifies an optional name for this DST specification. May be up to six characters in length. The default is an empty string. Specifies an offset from standard time, in minutes. Value is in the range of 1 to 60. Default is 60 minutes. 32 | Chapter 2. Commands for Accessing the Switch