Netgear XCM8806 Chassis Hardware Installation Guide - Page 71

NETGEAR 8800 Chassis Switch CLI Manual • sec-model-USM • sec-level-noauth • read view name-defaultUserView • write view name- "" • notify view name-defaultNotifyView • non-volatile storage Usage Guidelines Use this command to configure access rights for a group. All access groups are created with a unique default context, "", as that is the only supported context. Use more than one character when creating unique community strings and access group names. A number of default groups are already defined. These groups are: admin, initial, v1v2c_ro, v1v2c_rw. • The default groups defined are v1v2c_ro for security name v1v2c_ro, v1v2c_rw for security name v1v2c_rw, admin for security name admin, and initial for security names initial, initialmd5, initialsha, initialmd5Priv and initialshaPriv. • The default access defined are admin, initial, v1v2c_ro, v1v2c_rw, and v1v2cNotifyGroup. Example In the following command, access for the group defaultROGroup is created with all the default values: security model usm, security level noauth, read view defaultUserView, no write view, notify view defaultNotifyView, and storage nonvolatile. configure snmpv3 add access defaultROGroup In the following command, access for the group defaultROGroup is created with the values: security model USM, security level authnopriv, read view defaultAdminView, write view defaultAdminView, notify view defaultAdminView, and storage nonvolatile. configure snmpv3 add access defaultROGroup sec-model usm sec-level authnopriv read-view defaultAdminView write-view defaultAdminView notify-view defaultAdminView configure snmpv3 add community configure snmpv3 add community [[hex ] | ] name [[hex ] |] user [[hex ] | ] {tag [[hex ] | ]} {volatile} Description Adds an SNMPv3 community entry. Chapter 3. Commands for Managing the Switch | 71