Netgear XCM8806 Chassis Hardware Installation Guide - Page 1063

NETGEAR 8800 Chassis Switch CLI Manual Description Enables redistribution of routes to OSPFv3. Syntax Description domainName direct ripng static cost ase-type-1 ase-type-2 number policy-map Specifies an OSPFv3 domain. OSPF-Default is the only one currently supported. Specifies direct routes. Specifies RIPng routes. Specifies static routes. Specifies a cost metric. Specifies AS-external type 1 routes. Specifies AS-external type 2 routes. Specifies a tag value. Specifies a policy. Default The default tag number is 0. The default setting is disabled. Usage Guidelines The cost metric is inserted for all RIPng-learned, static, and direct routes injected into OSPFv3. If the cost metric is set to 0, the cost is inserted from the route. The tag value is used only by special routing applications. Use 0 if you do not have specific requirements for using a tag. The tag value in this instance has no relationship with 802.1Q VLAN tagging. Note: Setting the tag value is not supported in this release. The same cost, type, and tag values can be inserted for all the export routes, or a policy can be used for selective insertion. When a policy is associated with the export command, the policy is applied on every exported route. The exported routes can also be filtered using a policy. Policy files for this command will only recognize the following policy attributes: • Match attributes • nlri / • Action (set) attributes • cost • tag Chapter 24. OSPFv3 Commands | 1063