Netgear XCM8806 Chassis Hardware Installation Guide - Page 426
con private-vlan add subscriber, con private-vlan delete, VLAN Commands
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 426 highlights
NETGEAR 8800 Chassis Switch CLI Manual configure private-vlan add subscriber configure private-vlan add subscriber {non-isolated} {loopback-port } Description Adds the specified VLAN as a subscriber VLAN on the specified PVLAN. Syntax Description name vlan_name non-isolated port Specifies the name of the PVLAN to which the VLAN is added. Specifies a VLAN to add to the PVLAN. Configures the subscriber VLAN as a non-isolated subscriber VLAN. Specifies the port that serves as the loopback port. Default If the non-isolated option is omitted, this command adds the specified VLAN as an isolated subscriber VLAN. Usage Guidelines The VLAN must be created and configured with a tag before it is added to the PVLAN. If the non-isolated option is omitted, the VLAN is added as an isolated subscriber VLAN. If the non-isolated option is included, the VLAN is added as an non-isolated subscriber VLAN. If two or more subscriber VLANs have overlapping ports (where the same ports are assigned to both VLANs), each of the subscriber VLANs with overlapping ports must have a dedicated loopback port. Example The following command adds VLAN restricted as a subscriber VLAN for the PVLAN named companyx: configure private-vlan companyx add subscriber restricted isolated configure private-vlan delete configure private-vlan delete [network | subscriber] Description Deletes the specified VLAN from the specified PVLAN. 426 | Chapter 9. VLAN Commands