Netgear XCM8806 Chassis Hardware Installation Guide - Page 141

NETGEAR 8800 Chassis Switch CLI Manual View Type Storage Type Row Status : Excluded : NonVolatile : Active View Name MIB Subtree Mask View Type Storage Type Row Status : defaultAdminView : 1 : : Included : NonVolatile : Active View Name MIB Subtree Mask View Type Storage Type Row Status : defaultNotifyView : 1 : : Included : NonVolatile : Active Total num. of entries in vacmViewTreeFamilyTable : 8 The following command displays a view with the view name Roview and subtree 1.3.6.1.2.1.1: show snmpv3 mib-view Roview subtree 1.3.6.1.2.1.1 show snmpv3 notify show snmpv3 notify {[[hex ] | ]} Description Displays the notifications that are set. This command displays the snmpNotifyTable. Syntax Description hex_notify_name notify_name Specifies the parameter name associated with the target. The value is to be supplied as a colon separated string of hex octets. Specifies the parameter name associated with the target. The value is to be supplied in ASCII format. Default N/A. Usage Guidelines Use this command to display entries from the SNMPv3 snmpNotifyTable. This table lists the notify tags that the agent will use to send notifications (traps). Chapter 3. Commands for Managing the Switch | 141