Netgear XCM8806 Chassis Hardware Installation Guide - Page 89

NETGEAR 8800 Chassis Switch CLI Manual Usage Guidelines Use this command to delete an entry from the snmpNotifyTable. When a notification is to be sent, this table is examined. For the target addresses that have been associated with the tags present in the table, notifications will be sent, based on the filters also associated with the target addresses. Example The following command removes the N1 entry from the table: configure snmpv3 delete notify N1 configure snmpv3 delete target-addr configure snmpv3 delete target-addr [{[[hex ] | ]} | all] Description Deletes SNMPv3 target addresses. Syntax Description hex_addr_name addr_name all Specifies an identifier for the target address. The value is to be supplied as a colon separated string of hex octets. Specifies a string identifier for the target address. Specifies all target addresses. Default N/A. Usage Guidelines Use this command to delete an entry in the SNMPv3 snmpTargetAddressTable. Example The following command deletes target address named A1: configure snmpv3 delete target-addr A1 configure snmpv3 delete target-params configure snmpv3 delete target-params [{[[hex ] | ]} | all] Description Deletes SNMPv3 target parameters. Chapter 3. Commands for Managing the Switch | 89