Netgear XCM8806 Chassis Hardware Installation Guide - Page 886
show iproute, Displays the contents of the IP routing table or the route origin priority.
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 886 highlights
NETGEAR 8800 Chassis Switch CLI Manual Syntax Description vlan_name Specifies a VLAN name. Default N/A. Usage Guidelines If no VLAN information is specified, then global IP configuration is displayed. Otherwise, specific VLAN information is displayed. Example The following example displays global IP configuration information and summary information on VLANs for a NETGEAR 8800 series switch: XCM8806.1 # show ipconfig vlan accounting Router Interface on VLAN alan1 is enabled and up. inet 192.18.2.1/24 broadcast 192.18.2.255 Mtu 1500 Flags: AddrMaskRly NO BOOTP Host NO DirBcstHwFwd NO Fwd Bcast NO IgnoreBcast NO IP Fwding YES IPmc Fwd YES Multinetted VLAN NO IRDP Advert NO SendParam YES SendPortUn YES Send Redir YES SendTimxceed YES SendUnreach YES TimeStampRly NO VRRP NO Unicast RPF NO Minimum Interval: 450 Lifetime: 1800 Preference: 0 show iproute show iproute {ipv4} {priority | vlan | permanent | | summary} {multicast | unicast} {vr }} Description Displays the contents of the IP routing table or the route origin priority. Syntax Description priority vlan_name permanent ip_address Displays the priority values for each route origin type. Specifies a VLAN name. Specifies permanent routing. Specifies an IP address. 886 | Chapter 19. IP Unicast Commands