Netgear XCM8806 Chassis Hardware Installation Guide - Page 139

NETGEAR 8800 Chassis Switch CLI Manual Group Name : initial Security Name : initialshaPriv Security Model : USM Storage Type : NonVolatile Row Status : Active Total num. of entries in vacmSecurityToGroupTable : 10 The following command shows information about the group testgroup and user name testuser: show snmpv3 group testgroup user testuser The following is sample output from this command: Group Name : testgroup Security Name : testuser Security Model : USM Storage Type : NonVolatile Row Status : Active show snmpv3 mib-view show snmpv3 mib-view {[[hex ] | ] {subtree }} Description Displays a MIB view. Syntax Description hex_view_name view_name object_identifier Specifies the name of the MIB view to display. The value is to be supplied as a colon separated string of hex octets. Specifies the name of the MIB view to display. The value is to be supplied in ASCII format. Specifies the object identifier of the view to display. Default N/A. Usage Guidelines The show snmpv3 mib-view command displays a MIB view. If you do not specify a view name, the command will display details for all the MIB views. If a subtree is not specified, then all subtrees belonging to the view name will be displayed. This command displays the SNMPv3 vacmViewTreeFamilyTable. Chapter 3. Commands for Managing the Switch | 139