Netgear XCM8806 Chassis Hardware Installation Guide - Page 1081
Usage Guidelines, Examples, Description, Syntax Description, Default, con bgp cluster-id
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1081 highlights
NETGEAR 8800 Chassis Switch CLI Manual Usage Guidelines BGP must be disabled before the AS number can be changed. The AS number is a 4-byte AS number in either the ASPLAIN or the ASDOT format as described in RFC 5396, Textual Representation of Autonomous System (AS) Numbers. Examples The following command specifies a local AS number using the ASPLAIN 4-byte AS number format: configure bgp AS-number 100000 The following command specifies a local AS number using the ASDOT 4-byte AS number format: configure bgp AS-number 45776.24064 configure bgp cluster-id configure bgp cluster-id Description Configures the local cluster ID. Syntax Description cluster-id Specifies a 4 byte field used by a route reflector to recognize updates from other route reflectors in the same cluster. The range is 0 - 4294967295. Default N/A. Usage Guidelines Used when multiple route reflectors are used within the same cluster of clients. NETGEAR recommends disabling BGP before configuring the cluster ID. Example The following command appends a BGP route reflector cluster ID to the cluster list of a route: configure bgp cluster-id 40000 configure bgp confederation-id configure bgp confederation-id Chapter 25. BGP Commands | 1081