Netgear XCM8806 Chassis Hardware Installation Guide - Page 149
The following command accesses the primary MSM installed in slot A from the backup MSM
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
NETGEAR 8800 Chassis Switch CLI Manual Example The following example makes the following assumptions: • The MSM installed in slot A is the primary • The MSM installed in slot B is the backup • You have a console connection to MSM B The following command accesses the primary MSM installed in slot A from the backup MSM installed in slot B: My8800.6 # telnet msm b Entering character mode Escape character is '^]'. telnet session telnet0 on /dev/ptyb0 login: admin password: NETGEAR 8800 Copyright (C) 2000-2007 NETGEAR. All rights reserved. Protected by US Patent Nos: 6,678,248; 6,104,700; 6,766,482; 6,618,388; 6,034,957; 6,859,438; 6,912,592; 6,954,436; 6,977,891; 6,980,550; 6,981,174; 7,003,705; 7,012,082; 7,046,665; 7,126,923; 7,142,509; 7,149,217; 7,152,124; 7,154,861 You are connected to a Backup node. Only a limited command set is supported. You may use "telnet msm A" to connect to the Master node to access the full set of commands. Press the or '?' key at any time for completions. Remember to save your configuration changes. My8800.1 > tftp tftp [ | ] {-v } [-g | -p] [{-l [internal-memory | memorycard | } {-r } | {-r } {-l [internal-memory | memorycard | ]}] Description Allows you to TFTP from the current command line interface session to a TFTP server. Chapter 3. Commands for Managing the Switch | 149