Netgear XCM8806 Chassis Hardware Installation Guide - Page 135

NETGEAR 8800 Chassis Switch CLI Manual • Max. Message Size-Maximum SNMP Message size supported by the Engine (8192). Example The following command displays information about the SNMPv3 engine on the switch: show snmpv3 engine-info The following is sample output from this command: SNMP Engine-ID SNMP Engine Boots SNMP Engine Time SNMP Max. Message Size : 80:0:11:AE:3:0:30:48:41:ed:97 'H' : 1 : 866896 : 8192 show snmpv3 filter show snmpv3 filter {[[hex ] | ] {{subtree} } Description Displays the filters that belong a filter profile. Syntax Description hex_profile_name profile_name object_identifier Specifies the filter profile to display. The value is to be supplied as a colon separated string of hex octets. Specifies the filter profile to display in ASCII format. Specifies a MIB subtree. Default N/A. Usage Guidelines Use this command to display entries from the snmpNotifyFilterTable. If you specify a profile name and subtree, you will display only the entries with that profile name and subtree. If you specify only the profile name, you will display all entries for that profile name. If you do not specify a profile name, then all the entries are displayed. Example The following command displays the part of filter profile prof1 that includes the MIB subtree 1.3.6.1.4.1: show snmpv3 filter prof1 subtree 1.3.6.1.4.1 The following is sample output from this command: Profile Name : prof1 Chapter 3. Commands for Managing the Switch | 135