Netgear XCM8806 Chassis Hardware Installation Guide - Page 191

NETGEAR 8800 Chassis Switch CLI Manual If a port in a link aggregation group fails, traffic is redistributed to the remaining ports in the LAG. If the failed port becomes active again, traffic is redistributed to include that port. You can view port status on the switch using the show ports commands. These commands, when used with specific keywords and parameters, allow you to view various issues such as collision statistics, link speed, flow control, and packet size. These port information displays show real-time statistics, or you can configure the display to show a snapshot of real-time statistics. You can configure WAN PHY OAM on those interfaces that connect 10G Ethernet ports to the SONET/SDH network. Commands that require you to enter one or more port numbers use the parameter in the syntax. On the 8800, a can be a list of slots and ports. For a detailed explanation of port specification, see Port Numbering in Chapter 1, "Command Reference Overview." clear counters ports clear counters ports Description Clears the counters associated with the ports. Syntax Description This command has no arguments or variables. Default N/A. Usage Guidelines Note: If you use the clear counters command with no keyword, the system clears the counters for all applications. This command clears the counters for the ports, including the following: • Statistics • Transmit errors • Receive errors • Collisions • Packets Chapter 5. Commands for Configuring Slots and Ports on a Switch | 191