Netgear XCM8806 Chassis Hardware Installation Guide - Page 1157

NETGEAR 8800 Chassis Switch CLI Manual Num any netMaskLen networkPrefixFilter exact Specifies the BGP community number. Specifies all routes with a given or larger mask length. Specifies a subnet mask length (number of bits). Specifies an IP address and netmask. Specifies an exact match with the IP address and subnet mask. Default If no address family is specified, IPv4 unicast is the default. Usage Guidelines Use this command to display information about BGP neighbor route flap dampening. The option network any / displays all BGP routes whose mask length is equal to or greater than , irrespective of their network address. The option network any / exact displays all BGP routes whose mask length is exactly equal to , irrespective of their network address. Example The following command displays information about a specified neighbor's dampened routes: show bgp neighbor 10.10.10.10 flap-statistics all show bgp neighbor routes show bgp neighbor {address-family [ipv4-unicast | ipv4-multicast]} [accepted-routes | received-routes | rejected-routes | suppressed-routes | transmitted-routes] {detail} [all | as-path | community [no-advertise | no-export | no-export-subconfed | number | :] | network [any / | ] {exact}] Description Displays information about specified neighbor routes. Syntax Description remoteaddr address-family accepted-routes received-routes rejected-routes Specifies an IP address that identifies a BGP neighbor. The address family. BGP supports two address families: IPv4 Unicast and IPv4 Multicast Specifies that only accepted routes should be displayed. Specifies that only received routes should be displayed. Specifies that only rejected routes should be displayed. Chapter 25. BGP Commands | 1157