Netgear XCM8806 Chassis Hardware Installation Guide - Page 1326
save configuration, the package.
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1326 highlights
NETGEAR 8800 Chassis Switch CLI Manual CLI.SESSION_TYPE telnet CLI.USER admin tag 24 vlanName red run update run update Description Activates a newly installed modular software package. Syntax Description This command has no arguments or variables. Default N/A. Usage Guidelines After you install a modular software package to the active partition, use this command to make the update active. This command causes the NETGEAR 8800 to start the newly installed processes contained in the package, without rebooting the switch. If you installed the package to the inactive partition, you need to reboot the switch to activate the package. Example The following command activates any newly installed modular software packages installed on the active partition: run update save configuration save configuration {primary | secondary | | } Description Saves the current configuration from the switch's runtime memory to non-volatile memory. Syntax Description primary secondary existing-config Specifies the primary saved configuration. Specifies the secondary saved configuration. Specifies an existing user-defined configuration. 1326 | Appendix A. Configuration and Image Commands