Netgear XCM8806 Chassis Hardware Installation Guide - Page 896

NETGEAR 8800 Chassis Switch CLI Manual Syntax Description This command has no arguments or variables. Default Disabled. Usage Guidelines In some instances, a DHCP server may not properly handle a DHCP request packet containing a relay agent option. Use this command to disable the switch from preventing DHCP reply packets with invalid or missing relay agent options from being forwarded to the client. To enable this check, use the following command: configure bootprelay dhcp-agent information check Example The following command disables the DHCP relay agent option check: unconfigure bootprelay dhcp-agent information check unconfigure bootprelay dhcp-agent information circuit-id port-information unconfigure bootprelay dhcp-agent information circuit-id port-information ports [ | all] Description Configures the circuit ID sub-option that identifies the specified ports to use the default value. Syntax Description portlist all Specifies a list of one or more ports that are to be configured to use the default value. Specifies that all ports are to be configured to use the default value. Default The port_info is encoded as ((slot_number * 1000) + port_number). For example, if the DHCP request is received on port 3:12, the default circuit ID port_info value is 3012. On non-slot-based switches, the default circuit ID port_info value is simply the port number. Usage Guidelines None. 896 | Chapter 19. IP Unicast Commands