Netgear XCM8806 Chassis Hardware Installation Guide - Page 665
The TCP port to use to contact the primary TACACS+ accounting server
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 665 highlights
NETGEAR 8800 Chassis Switch CLI Manual Description Displays the current TACACS+ accounting client configuration and statistics. Syntax Description This command has no arguments or variables. Default N/A. Usage Guidelines The output of this command displays the following information: • TACACS+ Accounting-The current state of TACACS+ accounting, enabled or disabled. • TACACS+ Accounting Server Connect Timeout-The amount of time configured to detect and recover from a TACACS+ server failure. • Primary TACACS+ Accounting Server-Describes information about the primary TACACS+ accounting server, including: • The name of the primary TACACS+ accounting server • The IP address of the primary TACACS+ accounting server • The TCP port to use to contact the primary TACACS+ accounting server • The IP address and VR used by the switch • The shared secret configured for the primary TACACS+ accounting server • Secondary TACACS+ Accounting Server-Contains the same type of output as the primary TACACS+ accounting server for the secondary TACACS+ accounting server, if configured. Example The following command displays TACACS+ accounting client configuration and statistics: show tacacs-accounting The following is sample output of this command: TACACS+ Accounting : enabled TACACS+ Acct Server Connect Timeout sec: 3 Primary TACACS+ Accounting Server: Server name : IP address : 10.201.31.238 Server IP Port: 49 Client address: 10.201.31.85 (VR-Default) Shared secret : qijxou Secondary TACACS+ Accounting Server:Not configured Chapter 15. Security Commands | 665