3Com 5500G-EI Command Reference Guide - Page 104
IP Address, Configuration, Commands, display ip host, Syntax, Parameter, Description, Example
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
104 CHAPTER 5: USING NETWORK PROTOCOL COMMANDS IP Address Configuration Commands This section describes the commands you can use to configure and manage IP Addressing on your Switch 5500G-EI. display ip host Syntax display ip host View All Views Parameter None Description Use the display ip host command to display all host names and their corresponding IP addresses. Example To display all host names and their corresponding IP addresses, type the following: display ip host The information displays in the following format: Host My Aa Age Flags Address 0 static 1.1.1.1 0 static 2.2.2.4 display ip interface Syntax display ip interface interface-type interface-number View All views Parameter vlan_id Enter the identifier of the vlan interface. Description Use the display ip interface vlan-interface command to view information on the specified interface. Example To display information for VLAN-interface 1, enter the following: display ip interface vlan-interface 1 The information displays in the following format: Vlan-interface1 current state : DOWN Line protocol current state : DOWN Internet Address is 1.1.1.1/8 Primary Broadcast address : 1.255.255.255