3Com 5500G-EI Command Reference Guide - Page 312

312 CHAPTER 8: USING QOS/ACL COMMANDS Description Using the acl command, you can reference ACL and implement the ACL control to the TELNET users. Using the undo acl command, you can remove the control from the TELNET users. Example Perform ACL control to the users who access the local Switch using TELNET (basic ACL 2000 has been defined). system-view System View: return to User View with Ctrl+Z [SW5500]user-interface vty 0 4 [SW5500-ui-vty0-4]acl 2000 inbound ip http acl Syntax ip http acl acl-number undo ip http acl View User Interface View Parameter acl-number: Specifies a basic ACL with a number in the range of 2000 to 2999. Description Use the ip http acl command to call an ACL and perform ACL control over the WEB network management users. Use the undo ip http acl command to cancel the ACL control over the WEB network management users. This command calls numbered basic ACL only. Example To perform ACL control over the WEB network management users, enter the following: (Suppose ACL 2020 has been defined.) system-view System View: return to User View with Ctrl+Z [SW5500]ip http acl 2020 snmp-agent community Syntax snmp-agent community { read | write } community-name [ [ mib-view view-name ] | [ acl acl-number ] ]* undo snmp-agent community community-name View System View