3Com 5500G-EI Command Reference Guide - Page 122
display dhcp-security, Syntax, Parameters, Description, Example
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
122 CHAPTER 5: USING NETWORK PROTOCOL COMMANDS To delete the IP addresses of DHCP Server group1, enter the following: [SW5500]undo dhcp-server 1 display dhcp-security Syntax display dhcp-security [ ip_address | dynamic | static ] [ unit unit-id ] . View All views Parameters ip_address Enter to display user address entries of the specific IP address.. dynamic Enter to display the dynamic address table entry. static Enter to display the static address table entry. unit unit-id Enter to display user address entries of the specific unit ID, ranging from 1 to 8. Description Use the display dhcp-security command to display information on all clients. Use the display dhcp-security ip_address command to display information on a specific client. Use the IP address to identify the client. Example To display the IP addresses for each client, enter the following: display dhcp-security The information displays in the following format: Unit ID IP Address MAC Address Type 1 2.2.2.2 0005.5d02.f2b2 Static 1 3.3.3.3 0005.5d02.f2b3 Dynamic --- 2 dhcp-security item(s) found --- display dhcp-server Syntax display dhcp-server groupNo View All views. Parameter groupNo Enter a DHCP Server group number, in the range 0 to 19.