3Com 5500G-EI Command Reference Guide - Page 406

406 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS [SW5500]execute test.bat file prompt Syntax file prompt { alert | quiet } View System view Parameter alert: Select confirmation on dangerous file operations.. The default value is alert. quiet: No confirmation prompt on file operations. Description Use the file prompt command to modify the prompt mode of file operations on the Switch. If the prompt mode is set as quiet, so no prompts are shown for file operations, some non-recoverable operations may lead to system damage. Example Configure the prompt mode of file operation as quiet. system-view System View: return to User View with Ctrl+Z [SW5500]file prompt quiet format Syntax format filesystem View User view Parameter filesystem: Device name. Description Use the format command to format the storage device. All of the files on the storage device will be lost and non-recoverable. Specially, configuration files will be lost after formatting flash memory. Example Format flash: format unit1>flash: All data on unit1>flash: will be lost , proceed with format ? [Y/N] y % Now begin to format flash, please wait for a while... Format unit1>flash: completed mkdir Syntax mkdir directory