3Com 5500G-EI Command Reference Guide - Page 464
Description, Example, info-center loghost, Syntax, Parameter
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 464 highlights
464 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS Description Use the info-center logbuffer command to configure to output information to the memory buffer. Use the undo info-center logbuffer command to cancel the information output to buffer This command takes effect only after the system logging is enabled. For the related commands, see info-center enable, display info-center. Example Send log information to buffer and sets the size of buffer as 50. system-view System View: return to User View with Ctrl+Z. [SW5500]info-center logbuffer 50 info-center loghost Syntax info-center loghost host-ip-addr [ channel { channel-number | channel-name } | facility local-number | language { chinese | english } ] undo info-center loghost host-ip-addr View System view Parameter host-ip-addr: IP address of info-center loghost. channel: Configure information channel of the info-center loghost. channel-number: Channel number, ranging from 0 to 9, that is, system has ten channels. channel-name: Specify the channel name. The name can be channel6, channel7, channel8, channel9, console, logbuffer, loghost, monitor, snmpagent, trapbuffer. facility: Configure the recording tool of info-center loghost. local-number: Record tool of info-center loghost, ranging from local0 to local7. language: Set the logging language. chinese, english: Language used in log file. Description Use the info-center loghost command to set the IP address of the info-center loghost to send information to it. Use the undo info-center loghost command to cancel output to info-center loghost. By default, switches do not output information to info-center loghost. This command takes effect only after the system logging is enabled.