3Com 5500G-EI Command Reference Guide - Page 455

HWPing Commands 455 View HWPing Test Group View Parameter ip-address: Destination IP address in a test Description Use the destination-ip command to configure the destination IP address in the test. Use the undo destination-ip command to delete the configured destination IP address. By default, no destination IP address is configured for any test. Example Set the destination IP address in the test to 169.254.10.3 [SW5500-administrator-icmp]destination-ip 169.254.10.3 frequency Syntax frequency interval undo frequency View HWPing Test Group View Parameter interval: Automatic test interval, in the range 0 to 65535. Default is 0 which means no automatic test. Description Use the frequency command to configure an automatic test interval. Use the undo frequency command to disable an automatic test. The system automatically tests at intervals specified by this command, where the argument interval is greater than 0. For the related command, see count. Example Set the automatic test interval to 10 seconds. [SW5500-administrator-icmp]frequency 10 test-type Syntax test-type type View HWPing Test Group View