3Com 5500G-EI Command Reference Guide - Page 190
display ospf error, Syntax, Parameter, Description, Example
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
190 CHAPTER 6: USING ROUTING PROTOCOL COMMANDS Table 28 Output Description of the display ospf cumulative Command Field IO Statistics Type Input Output ASE checksum sum LSAs originated received Router SumNet SumASB Area Neighbors Interfaces Spf rtr, net, sumasb, sumnet Routing Table Intra Area Inter Area ASE Description Type of input/output OSPF packet. Number of received packets. Number of transmitted packets. Number of all ASE LSAs. Checksum of ASE LSAs. Number of originated LSAs. Number of received LSAs generated by other routers. Number of all Router LSAs. Number of all Sumnet LSAs. Number of all SUMASB LSAs Number of neighbors in this area. Number of interfaces in this arera. Number of SPF computation count in this area. Number of all LSAs in this area. Number of intra-area routes. Number of inter-area routes. Number of external routes. display ospf error Syntax display ospf [ process-id ] error View All Views Parameter process-id Enter the process ID of OSPF, ranging from 1 to 65535. The command is applied to all current OSPF processes if you do not specify a process ID. Description Use the display ospf error command to view OSPF error information. Example To display the OSPF error information, enter the following: display ospf error OSPF Process 1 with Router ID 1.1.1.1 The information displays in the following format: OSPF packet error statistics: 0: IP: received my own packet 0:OSPF: wrong packet type 0: OSPF: wrong version 0:OSPF: wrong checksum 0: OSPF: wrong area id 0:OSPF: area mismatch 0: OSPF: wrong virtual link 0:OSPF: wrong authentication type 0: OSPF: wrong authentication key0:OSPF: too small packet