3Com 5500G-EI Command Reference Guide - Page 402

402 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS File System Management Commands ■ ntp-service unicast-peer ■ ntp-service unicast-server SSH Configuration Commands ■ debugging ssh server ■ display rsa local-key-pair public ■ display rsa peer-public-key ■ display ssh server ■ display ssh user-information ■ peer-public-key end ■ protocol inbound ■ public-key-code begin ■ public-key-code end ■ rsa local-key-pair create ■ rsa local-key-pair destroy ■ rsa peer-public-key ■ ssh server authentication-retries ■ ssh server rekey-interval ■ ssh server timeout ■ ssh user assign rsa-key ■ ssh user username authentication-type This section describes the commands you can use to manage the file system on your Switch 5500G-EI. In switches supporting the XRN feature, the file path must start with "unit[No.]>flash:/:", the [No.] is the unit ID. For example, suppose unit ID is 1, and the path of the "text.txt" file under the root directory must be "unit1>flash:/text.txt". cd Syntax cd directory View User view Parameter directory: Destination directory. The default directory is the working path configured by the user when the system starts. Description Use the cd command to change the current user configuration path on the Switch.