3Com 5500G-EI Command Reference Guide - Page 52
Field, Description, Output Description of the Display Interface Command - tag ports to vlan
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
52 CHAPTER 2: USING PORT COMMANDS IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 00e0-fc00-0010 The Maximum Transmit Unit is 1500 Media type is twisted pair, loopback not set Port hardware type is 1000_BASE_T Unkown-speed mode, unknown-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation Flow-control is not enabled The Maximum Frame Length is 1536 Broadcast MAX-ratio: 100% Allow jumbo frame to pass PVID: 1 Mdi type: auto Port link-type: access Tagged VLAN ID : none Untagged VLAN ID : 1 Last 300 seconds input: 0 packets/sec 0 bytes/sec Last 300 seconds output: 0 packets/sec 0 bytes/sec Input(total): 0 packets, 0 bytes - broadcasts, - multicasts Input(normal): 0 packets, 0 bytes 0 broadcasts, 0 multicasts Input: 0 input errors, 0 runts, 0 giants, 0 throttles, 0 CRC frame, - overruns, 0 aborts, - ignored, - parity errors Output(total): 0 packets, 0 bytes - broadcasts, - multicasts, - pauses Output(normal): 0 packets, 0 bytes 0 broadcasts, 0 multicasts, 0 pauses Output: 0 output errors, - underruns, - buffer failures - aborts, 0 deferred, 0 collisions, 0 late collisions - lost carrier, - no carrier Table 6 Output Description of the Display Interface Command Field Ethernet1/0/1 current state IP Sending frames' format Hardware address Description The Maximum Transmit Unit Media type loopback not set Port hardware type Unknowns-speed mode, unknown-duplex mode, link speed type is autonegotiation, link duplex type is autonegotiation Flow control is not enabled The Maximum Frame Length Broadcast MAX ratio Allow jumbo frame to pass Description Indicates the current state of the Ethernet port (up or down) Displays the Ethernet frame format Displays the port hardware address Displays the port description Indicates the maximum transmit unit Indicates the type of media Displays the port loopback test state Displays the port hardware type Both the duplex mode and the rate are set to auto-negotiation. Port flow control state Indicates the maximum length of the Ethernet frames that can pass through the port Port broadcast storm suppression ratio Indicates that jumbo frame are allowed to pass through the port