3Com 5500G-EI Command Reference Guide - Page 121
Example, dhcp-server ip, Syntax, Parameters, Description, Servers in DHCP Server group.
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
DHCP Relay Configuration Commands 121 Use the undo dhcp-server command to remove the VLAN interface from the selected DHCP Server group. By default, DHCP Server requests are not forwarded. You can only add the primary VLAN interface to a DHCP Server group. The primary VLAN interface is the first interface that you configure. This command has more parameters when entered in system view. Refer to dhcp-server ip below for details. Related commands: dhcp-server ip, display dhcp-server, display dhcp-server interface vlan-interface, debugging dhcp-relay. Example To add VLAN-Interface 1 to DHCP Server group1, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]interface vlan-interface 1 [SW5500-Vlan-interface1]dhcp-server 1 dhcp-server ip Syntax dhcp-server groupNo ip ipaddress1 [ ipaddress2 ] undo dhcp-server groupNo View System View Parameters groupNo Enter the DHCP server group number, in the range 0 to 19. ipaddress1 Enter the IP address of the primary Server in the group. ipaddress2 Enter the IP address of the secondary Server in the group. Optional. Description Use the dhcp-server ip command to configure the IP address of the DHCP Server used by the DHCP Server group. Use the undo dhcp-server ip command to delete the IP addresses of all DHCP Servers in DHCP Server group. This command has fewer parameters when entered in VLAN Interface View. Refer to dhcp-server command for details. Related commands: dhcp-server, debugging dhcp-relay. Example To configure the primary and secondary IP addresses of DHCP Server group 1 as 1.1.1.1 and 2.2.2.2 respectively, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]dhcp-server 1 ip 1.1.1.1 2.2.2.2