3Com 5500G-EI Command Reference Guide - Page 440
Example, reboot, Syntax, Parameter, Description, schedule reboot at, Reboots the Switch.
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 440 highlights
440 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS Related command: reboot, schedule reboot at, schedule reboot delay, undo schedule reboot. Example Display the configuration of the schedule reboot terminal service parameters of the current switch. display schedule reboot Reboot system at 16:00:00 2002/11/1 (in 2 hours and 5 minutes). reboot Syntax reboot [ unit unit-id ] View User view Parameter unit unit-id: Specify the Unit ID of the switch Description Use the reboot command to reset the Switch when failure occurs. Example Reboots the Switch. reboot This will reboot device. Continue? [Y/N] schedule reboot at Syntax schedule reboot at hh:mm [ yyyy/mm/dd ] undo schedule reboot View User view Parameter hh:mm: Reboot time of the switch, in the format of "hour: minute" The hh ranges from 0 to 23, and the mm ranges from 0 to 59. yyyy/mm/dd: Reboot date of the switch, in the format of "year/month/day. The yyyy ranges from 2000 to 2099, the mm ranges from 1 to 12, and the value of dd is related to the specific month. Description Use the schedule reboot at command to enable the timing reboot function of the switch and set the specific reboot time and date. Use the undo schedule reboot command to disable the timing reboot function. By default, the timing reboot switch function is disabled.