3Com 5500G-EI Command Reference Guide - Page 395

RADIUS Protocol Configuration Commands 395 [SW5500]radius scheme 3Com [SW5500-radius-3Com]timer response-timeout 5 user-name-format Syntax user-name-format { with-domain | without-domain } View RADIUS Scheme View Parameter with-domain: Specifies to send the username with domain name to RADIUS server. without-domain: Specifies to send the username without domain name to RADIUS server. Description Use the user-name-format command to configure the username format sent to RADIUS server. By default, the username sent to RADIUS servers includes the ISP domain name. The supplicants are generally named in userid@isp-name format. The part following "@" is the ISP domain name. The Switch will put the users into certain ISP domains according to the domain names. However, some earlier RADIUS servers reject the username including the ISP domain name. In this case, the username will be sent to the RADIUS server after its domain name is removed. Accordingly, the Switch provides this command to decide whether the username that is to be sent to RADIUS server carries the ISP domain name or not. If a RADIUS scheme is configured to reject usernames including ISP domain names, the RADIUS scheme shall not be simultaneously used in more than one ISP domains. Otherwise, the RADIUS server will regard two users in different ISP domains as the same user by mistake, if they have the same username (excluding their respective domain names.) Related command: radius scheme. Example To specify to send the username without domain name to RADIUS server, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]radius scheme 3Com [SW5500-radius-3Com]user-name-format without-domain