3Com 5500G-EI Command Reference Guide - Page 270

270 CHAPTER 7: USING MULTICAST PROTOCOL COMMANDS View All Views Parameter interface-type interface-number: Interface type and interface number, used to specify the interface. Description Use the display pim neighbor to view the PIM neighbor information. Example display pim neighbor Neighbor Address Interface Name Uptime 8.8.8.6 VLAN-interface10 1637 Table 48 Output description about PIM neighbors Expires 89 Field Neighbor Address Interface Uptime Expires Description Neighbor address Interface where the neighbor has been discovered Time passed since the multicast group has been discovered Specifies when the member will be removed from the group display pim routing-table Syntax display pim routing-table [ { { *g [ group-address [ mask { mask-length | mask } ] ] | **rp [ rp-address [ mask { mask-length | mask group-address [ mask { mask-length | mask } ] | source-address [ mask { mask-length | mask incoming-interface { interface-type interface-num | interface-name | null } | { dense-mode | sparse-mode } ] * View All views Parameter **rp: (*, *, RP) route entry. *g: (*, G) route entry. group-address: Address of the multicast group. source-address: IP address of the multicast source. incoming-interface: Router entry with the specified incoming interface. Description Use the display pim routing-table to view the contents of the PIM multicast routing table. Related command: display multicast routing-table.