3Com 5500G-EI Command Reference Guide - Page 193

OSPF Configuration Commands 193 Table 30 Output Description of the display ospf interface Command Field Cost State Type Priority Designated Router Backup Designated Router Timers Description Cost of the interface State of the interface state machine Network type of OSPF Priority of DR for interface election Designated router on the network in which the interface resides Backup designated router on the network in which the interface resides OSPF timers: ■ Hello - Interval of hello packets ■ Dead - Interval of dead neighbors ■ Poll - Interval of poll ■ Retransmit - Interval of retransmitting LSA ■ Transmit delay - Delay time of transmitting LSA display ospf lsdb Syntax display ospf [ process-id ] [ area_id ] lsdb [ brief | [ asbr | ase | network | nssa | router | summary ] [ ip_address ] [ originate-router ip_address | self-originate ]] View All Views Parameters process-id Enter the process ID of OSPF, ranging from 1 to 65535. The command is applied to all current OSPF processes if you do not specify a process ID. area_id Enter the ID of the OSPF area, as either an ID number or an IP address. brief Enter to view brief information. asbr Enter to view information about summary ASBR-LSA. ase Enter to view information about AS-external-LSA. network Enter to view information about the Network LSA. nssa Enter to view information about the NSSA-external-LSA. router Enter to view information about the Router-LSA. summary Enter to view information about Summary-Net-LSA. originate-router Enter to view information about the LSA generator. self-originate Enter to view information about self-originated LSA.