3Com 5500G-EI Command Reference Guide - Page 444

444 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS offset_time: Enter the offset time, that is the amount of time added, in the format HH:MM:SS. Description Use the clock summer-time command to set the name, start date and time, and end date and time of summer time. Use the undo clock summer-time command to cancel the currently configured summer time. Use the display clock command to check the summer time settings. Related command: clock timezone Example To set the summer time for zone 2 to start at 06:00:00 on 08/06/2002, and end at 06:00:00 on 01/09/2002, with a time added of one hour, enter the following: clock summer-time z2 one-off 06:00:00 2002/06/08 06:00:00 2002/09/01 01:00:00 To set the summer time for zone 2 to start at 06:00:00 on 08/06, and end at 06:00:00 on 01/09 in each year starting in 2002, with a time added of one hour, enter the following: clock summer-time z2 repeating 06:00:00 2002/06/08 06:00:00 2002/09/01 01:00:00 clock timezone Syntax clock timezone zone_name { add | minus } HH:MM:SS undo clock timezone View User view Parameter zone_name: Enter the name of the time zone, up to 32 characters in length. add: Specifies that time is ahead of UTC. minus: Specifies that time is behind UTC. HH:MM:SS: Enter the time difference between the time zone and UTC. Description Use the clock timezone command to set local time zone information. Use the undo clock timezone command to return to the default, which is Universal Time Coordinated (UTC). Use the display clock command to check the summer time settings.