3Com 5500G-EI Command Reference Guide - Page 51
Description, Example, display interface, Syntax, Parameter
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Ethernet Port Configuration Commands 51 Description Use the description command to enter a description of an Ethernet port. Use the undo description command to cancel the description. By default, an Ethernet port does not have a description. Example Set the description of port Ethernet1/0/1 to be lanswitch-interface. system-view System View: return to User View with Ctrl+Z. [SW5500]interface Gigabitethernet 1/0/1 [SW5500-GigabitEthernet1/0/1]description lanswitch-interface display interface Syntax display interface [ interface_type | interface_type interface_number ] View All views Parameter interface_type: Enter the interface type. This can be either Aux, Ethernet, GigabitEthernet , NULL, Vlan-interface. interface_number: Enter the interface number in the format unit-number/0/port-number. The unit number is a number in the range 1 to 8. The port number is a number in the range 1 to 28 or 1 to 52 depending on the number of ports you have on your unit. You can use the interface_name at this command. This consists of the interface_type and the interface_number combined as a single parameter. For example Ethernet1/0/1. Description Use the display interface command to view the configuration information on the selected interface. Along with others, this interface could be a specific port's interface (for example, Ethernet1/0/1) or a specific VLAN interface (for example, vlan-interface 1). Example To display configuration information on Ethernet port 1/0/1, enter the following: display interface Ethernet 1/0/1 The information displays in the following format: Ethernet1/0/1 current state : UP