3Com 5500G-EI Command Reference Guide - Page 348
Description, Example, dot1x port-method, Syntax, command to con the mode for 802.1x
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 348 highlights
348 CHAPTER 11: USING AAA AND RADIUS COMMANDS authorized-force: Forced authorized mode, configuring the interface to always stay in authorized state and the user is allowed to access the network resources without authentication/authorization. unauthorized-force: Forced unauthorized mode, configuring the interface to always stay in non-authorized mode and the user is not allowed to access the network resources. interface interface-list: Ethernet interface list including several Ethernet interfaces, expressed in the format interface-list = { interface-num [ to interface-num ] } & < 1-10 >. interface-num specifies a single Ethernet interface in the format interface-num = { interface-type interface-num | interface-name }, where interface-type specifies the interface type, interface-num specifies the interface number and interface-name specifies the interface name. For the respective meanings and value ranges, see the parameters of the Port Command chapter. Description Use the dot1x port-control command to configure the mode for 802.1x to perform access control on the specified interface. Use the undo dot1x port-control command to restore the default access control mode. By default, the value is auto. This command is used to set the mode, or the interface state, for 802.1x to perform access control on the specified interface. This command has an effect on the interface specified by the parameter interface-list when executed in System View. It has an effect on all the interfaces when no interface is specified. The parameter interface-list cannot be entered when the command is executed in Ethernet Port View and it has an effect only on the current interface. Related command: display dot1x. Example To configure the interface GigabitEthernet 1/0/1 to be in force-unauthorized state, enter the following: system-view System View: return to User View with Ctrl-Z [SW5500]dot1x port-control force-unauthorized interface gigabitethernet 1/0/1 dot1x port-method Syntax dot1x port-method { macbased | portbased } [ interface interface-list ] undo dot1x port-method [ interface interface-list ] View Ethernet Port View