3Com 5500G-EI Command Reference Guide - Page 507
Example, ntp-service, max-dynamic sessions, Syntax, Parameter, Description, multicast-client
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 507 highlights
NTP Configuration Commands 507 Designate an interface on the local equipment to broadcast NTP packets. The local equipment runs in broadcast-server mode and regularly broadcasts packets to its clients. Example Configure to broadcast NTP packets via Vlan-Interface1 and encrypt them with Key 4 and set the NTP version number as 3. system-view System View: return to User View with Ctrl+Z. [SW5500]interface vlan-interface1 [SW5500-Vlan-Interface1]ntp-service broadcast-server authentication-key 4 version 3 ntp-service Syntax max-dynamic sessions ntp-service max-dynamic-sessions number undo ntp-service max-dynamic-sessions View System view Parameter number: The maximum sessions can be created locally, ranging from 0 to 100. Description Use the ntp-service max-dynamic-sessions command to set how many sessions can be created locally. Use the undo ntp-service max-dynamic-sessions command to resume the default maximum session number By default, a local device allows up to 100 sessions. Example Set the local equipment to allow up to 50 sessions. system-view System View: return to User View with Ctrl+Z. [SW5500]ntp-service max-dynamic-sessions 50 ntp-service Syntax multicast-client ntp-service multicast-client [ ip-address ] undo ntp-service multicast-client [ ip-address ] View VLAN interface view Parameter ip-address: Specify a multicast IP address of Class D.