3Com 5500G-EI Command Reference Guide - Page 374

374 CHAPTER 11: USING AAA AND RADIUS COMMANDS [SW5500]domain marlboro.net [SW5500-isp-marlboro.net]state block [SW5500-isp-marlboro.net]quit To set the user 3Com1 to be in the block state, enter the following: [SW5500-user-3Com1]state block RADIUS Protocol Configuration Commands This section describes how to use the RADIUS Protocol configuration commands on your Switch. accounting optional Syntax accounting optional undo accounting optional View ISP Domain View Parameter None Description Use the accounting optional command to enable the selection of the RADIUS accounting option. Use the undo accounting optional command to disable the selection of RADIUS accounting option. By default, selection of the RADIUS accounting option is disabled. If no RADIUS server is available or if RADIUS accounting server fails when the accounting optional is configured, the user can still use the network resource, otherwise, the user will be disconnected. The user configured with accounting optional command in RADIUS scheme will no longer send real-time accounting update packet or stop accounting packet. The accounting optional command in RADIUS Scheme View is only effective on the accounting that uses this RADIUS scheme. Example Enable the selection of RADIUS accounting of the RADIUS scheme named as CAMS. system-view System View: return to User View with Ctrl+Z. [SW5500]radius scheme cams New Radius scheme [SW5500-radius-cams]accounting optional data-flow-format Syntax data-flow-format data { byte | giga-byte | kilo-byte | mega-byte } packet { giga-byte | kilo-byte | mega-byte | one-packet }