3Com 5500G-EI Command Reference Guide - Page 96
Parameter, Description, Example, poe max-power, Syntax
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
96 CHAPTER 4: USING POWER OVER ETHERNET (POE) COMMANDS View System View Parameter None Description Use the poe legacy enable command to enable the nonstandard-PD detect function. Use the undo poe legacy enable command to disable the nonstandard-PD detect function. PDs compliant with 802.3af standards are called standard PDs. By default, the nonstandard-PD detect function is disabled. Example Enable the nonstandard-PD detect function. [SW5500]poe legacy enable Legacy detection is enabled Disable the nonstandard-PD detect function. [SW5500]undo poe legacy enable Legacy detection is disabled poe max-power Syntax poe max-power max-power undo poe max-power View Ethernet Port View Parameter max-power: Maximum power distributed to the port, ranging from 1000 to 15400 mW. Description Use the poe max-power command to configure the maximum power that can be supplied by current port. Use the undo poe max-power command to restore the maximum power supplied by current port to the default value. By default, the maximum power that a port can supply is 15400 mW.