3Com 5500G-EI Command Reference Guide - Page 413

Configuration File Management Commands 413 To view the pre-positive and post-positive configuration information, enter the following: display current-configuration configuration display Syntax saved-configuration display saved-configuration [ unit unit-id ] View All views Parameter unit unit-id: Specify the Unit ID of switch. Description Use the display saved-configuration command to view the configuration files in the flash memory of the Switch. If the Switch works abnormally after power on, execute the display saved-configuration command to view the startup configuration of the Switch. Related commands: save, reset saved-configuration, display current-configuration. Example To display configuration files in flash memory of the Switch, enter the following: display saved-configuration display this Syntax display this View All views Parameter None Description Use the display this command, to display the configuration of the current view. If you need to authenticate whether the configurations are correct, after you have finished a set of configurations under a view to use the display this command to view the parameters. Some effective parameters are not displayed if they are the same as the default ones. Some ineffective parameters that were configured by the user, are not displayed either. Associated configuration of the interface is displayed when executing the command in different interface views, related configuration of the protocol view is displayed when excecuting this command in different protocol views, and all the