3Com 5500G-EI Command Reference Guide - Page 496

496 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS Table 67 Output description of the display rmon statistics command Field Interface 3Com VALID octets packets broadcast packets multicast packets undersized packets oversized packets fragments packets jabbers CRC alignment errors collisions Dropped packet (insufficient resources) Description Port Owner The entry corresponding to the index is valid Received/Sent octets in sampling time Packets received/sent in sampling time Number of broadcast packets Number of multicast packets Number of undersized packets Number of oversized packets Number of undersized and CRC error packets Number of oversized and CRC error packets Number of CRC error packets Number of collision packets Dropping packet events rmon alarm Syntax rmon alarm entry-number alarm-variable sampling-time { delta | absolute } rising-threshold threshold-value1 event-entry1 falling-threshold threshold-value2 event-entry2 [ owner text ] undo rmon alarm entry-number View System view Parameter entry-number: Number of the entry to be added/deleted, ranging from 1 to 65535. alarm-variable: Specifies the alarm variable with a character string, ranging from 1 to 256, in the OID dotted format, like 1.3.6.1.2.1.2.1.10.1 (or ifInOctets.1). sampling-time: Specifies the sampling interval, ranging from 5 to 65535 (measured in seconds). delta: Sampling type is delta. absolute: Sampling type is absolute. rising-threshold threshold-value1: Rising threshold, ranging from 0 to 2147483647. event-entry1: Event number corresponding to the upper limit of threshold, ranging from 0 to 65535.