3Com 5500G-EI Command Reference Guide - Page 458
display info-center, Syntax, Parameter, Description, Example, display logbuffer
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 458 highlights
458 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS display info-center Syntax display info-center View All views Parameter None Description Use the display info-center command to display the configuration of system log and the information recorded in the memory buffer. If the information in the current log/trap buffer is less than the specified sizeval, display the actual log/trap information. For the related commands, see info-center enable, info-center loghost, info-center logbuffer, info-center console channel, info-center monitor channel. Example Show the system log information. display info-center Information Center: enabled Log host: 173.168.1.10, channel number:2, channel name:loghost, language:english , host facility local:7 Console: channel number:0, channel name:console Monitor: channel number:1, channel name:monitor SNMP Agent: channel number:5, channel name:snmpagent Log buffer: enabled, max buffer size:1024, current buffer size:256 current messages:6, channel number:4, channel name:logbuffer dropped messages:0, overwrote messages:0 Trap buffer: enabled, max buffer size:1024, current buffer size:256 current messages:0, channel number:3, channel name:trapbuffer dropped messages:0, overwrote messages:0 Information timestamp setting: log - date, trap - date, debug - boot XRN SWITCH OF this Device: LOG = disable; TRAP = disable; DEBUG = enable display logbuffer Syntax display logbuffer [ level severity | size buffersize ]* [ | { begin | exclude | include } regular-expression ]