3Com 5500G-EI Command Reference Guide - Page 212
ospf timer poll, Syntax, Parameter, Description, Example, ospf timer retransmit
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 212 highlights
212 CHAPTER 6: USING ROUTING PROTOCOL COMMANDS system-view System View: return to User View with Ctrl+Z. [SW5500]interface Vlan-interface 1 [SW5500-Vlan-interface1]ospf timer hello 20 ospf timer poll Syntax ospf timer poll seconds undo ospf timer poll View VLAN Interface view Parameter seconds Enter the the poll Hello interval in seconds, in the range 1 to 65535. The default value is 120 seconds. Description Using the ospf timer poll command, you can configure the Hello packet poll interval. Using the undo ospf timer poll command, you can restore the default poll interval. The Poll interval should be at least three times the Hello interval. Example To set the transmit poll Hello packet interval to 130 seconds for interface Vlan-interface 2, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]interface Vlan-interface 2 [SW5500-Vlan-interface2]ospf timer poll 130 ospf timer retransmit Syntax ospf timer retransmit interval undo ospf timer retransmit View VLAN Interface view Parameter interval Enter the interval allowed before LSA re-transmission. This time is set for an interface, in seconds, in the range 1 to 65535. The default value is 5 seconds. Description Using the ospf timer retransmit command, you can configure the interval before LSA re-transmission on an interface.