3Com 5500G-EI Command Reference Guide - Page 198

198 CHAPTER 6: USING ROUTING PROTOCOL COMMANDS View All Views Parameter process-id: Enter the process ID of OSPF, ranging from 1 to 65535. The command is applied to all current OSPF processes if you do not specify a process ID. Description Use the display ospf request-queue command to view information about the OSPF request-queue. Example To display the information on the OSPF request-queue, enter the following: display ospf request-queue The information displays in the following format: The Router's Neighbors is RouterID: 1.1.1.1 Address: Interface: 1.1.1.3 Area: LSID: 1.1.1.3 AdvRouter: 1.1.1.1 0.0.0.0 1.1.1.3 Sequence:80000017 Age:35 Table 36 Output Description of the display ospf request-queue Command Field Router ID Address Interface Area LSID:1.1.1.3 AdvRouter Sequence Age Description Router ID of neighbor router Address of the interface, through which neighbor routers communicate with the router Address of the interface on the network segment Area number of OSPF Link State ID of the LSA Router ID of the router originating the LSA Sequence number of the LSA, used to discover old and repeated LSAs Age of the LSA display ospf Syntax retrans-queue display ospf [ process-id ] retrans-queue View All Views Parameter process-id: Enter the process ID of OSPF, ranging from 1 to 65535. The command is applied to all current OSPF processes if you do not specify a process ID. Description Use the display ospf retrans-queue command to view information on the OSPF retransmission queue.