3Com 5500G-EI Command Reference Guide - Page 189

OSPF Configuration Commands 189 Table 27 Output Description of the display ospf brief Command Timers OSPF timers: ■ Hello - Interval of hello packets ■ Dead - Interval of dead neighbors ■ Poll - Interval of poll ■ Retransmit - Interval of retransmitting LSAs ■ Transmit delay - Delay time of transmitting LSAs display ospf cumulative Syntax display ospf [ process-id ] cumulative View All Views Parameter process-id Enter process ID of OSPF, ranging from 1 to 65535. The command is applied to all current OSPF processes if you do not specify a process ID. Description Use the display ospf cumulative command to view the OSPF cumulative information. Example To display the OSPF cumulative information, enter the following: display ospf cumulative OSPF Process 1 with Router ID 1.1.1.1 The information displays in the following format: Cumulations IO Statistics Type Input Output Hello 225 437 DB Description 78 86 Link-State Req 18 18 Link-State Update 48 53 Link-State Ack 25 21 ASE: 1 Checksum Sum: FCAF LSAs originated by this router Router: 50 SumNet: 40SumASB: 2 LSAs Originated: 92 LSAs Received: 33 Area 0.0.00.0: Neighbors: 1 Interfaces: 1 Spf: 54 Checksum Sum F020 rtr: 2 net: 0 sumasb: 0 sumnet: 1 Area 0.0.0.1: Neighbors: 0 Interfaces: 1 Spf: 19 Checksum Sum 14EAD rtr: 1 net: 0sumasb: 1sumnet: 1 Routing Table: Intra Area: 2 Inter Area: 0ASE: 1