3Com 5500G-EI Command Reference Guide - Page 437
Parameter, Description, Example, display cpu, Syntax, display device, and the next boot.
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 437 highlights
Device Management Commands 437 Parameter unit unit-id: Specify the Unit ID of the switch. Description Use the display boot-loader command to display APP file used for this boot and the next boot. Example display boot-loader The app to boot of board 0 at the next time is: flash:/platform.app The app to boot of board 0 at this time is: flash:/PLATV100R002B09D002.APP display cpu Syntax display cpu [ unit unit-id ] View All views. Parameter unit unit-id: Specify the Unit ID of the switch. Description Use the display cpu command to display CPU occupancy. Example To display CPU occupancy, enter the following: display cpu The information displays in the following format: CPU busy status: 18% in last 5 seconds 19% in last 1 minute 19% in last 5 minutes Table 54 Display information Field Board 0 CPU busy status 18% in last 5 seconds 19% in last 1 minute 19% in last 5 minutes Description The busy status of the Switch The CPU occupancy rate is 18% at last 5 seconds The CPU occupancy rate is 19% at last 1 minute The CPU occupancy rate is 19% at last 5 minutes display device Syntax display device [ unit unit-id ] View All views